Believe it or not, I'm actually putting a boat together!! I have been trying to get a 5.2 togerther for a friend for over a year, but finally gave up on it--hence, the ad in the classifieds. However, out of the blue, someone just contacted me because he wanted to sell his 5.2. Weird timing.
The boat is probably the nicest 5.2 I have ever seen except for the tramp. I had a spare one, but it didn't fit. Apparently, this is the wider tramp. figures. So, I bought a new one from SloSails. I ordered the slits for the jib wires, but for the life of me, I can't remember how to set up the boat so you can adjust the position of the jib block from the other side.
I remember there was a bungee that pulled it forward, then a line that went through the eyelet on the rear beam to a jam cleat or something on the end of the beam. This boat has nothing on the rear beam except the eyelets to attach the wire. I can figure something out, but does anyone have pictures of a smart way to set it up??
Thanks in advance..
Need help with Nacra 5.2 Jib wire crap
-
- Rank: Mate
- Registered: Oct 02, 2002
- Last visit: Aug 13, 2020
- Posts: 214
Posted: Mar 27, 2012 - 08:06 AM
-
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Mar 27, 2012 - 08:21 AM
I'll email you some pics -- I've got one set up in my driveway atm.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Mar 27, 2012 - 11:10 AM
Rob,
If you can photo-document the rigging setup it would be great if you would create an album in the Technical section "Nacra 5.2 Jib Rigging" or something so future 5.2 owners could benefit.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Mar 27, 2012 - 11:40 AM
I know, I know...that just sounded like a lot of effort. I'll try to make a beach cats album for it tonight.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Aug 13, 2010
- Last visit: Mar 10, 2014
- Posts: 294
Posted: Mar 27, 2012 - 05:33 PM
Rob.. Please Please.. I buy U some vino if you ever get out to calif.. I have 2 5.2s that need that upgrade cuz I am soooo tired of scraping my knee on that steel line!! Cheers Hal
--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness
I Need a A Cat Please
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Apr 03, 2012 - 11:46 AM
I do get out to California, careful what you offer. =)
I made an album. It's not super thorough, but hopefully gets the point across.
5.2 jib traveler setup
The slot on a 5.2 is very tight -- too tight if you use the default jib wire locations and don't use a barberhauler. So, either use a barberhauler, or move the front eyelets (just add new ones) outward on the main beam. I put mine underneath as I run the front of the line/wire under the tramp -- the slots on the tramps are in all different locations so this is skipper's choice.
Like I've said before, I actually use a couple inches of barberhauler going upwind on the 5.2 to open the slot a bit. Otherwise they feel all powered up and go nowhere.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Lubber
- Registered: Jun 05, 2012
- Last visit: Jul 02, 2012
- Posts: 1
Posted: Jul 01, 2012 - 10:07 PM
I am having the same problem with figuring out how to rig the jib. I am a recent owner of a 82 5.2 and it looks like I have the "deluxe" 4-way jib system. I have an unmodified tramp with the standard cables running fore and aft. What controls the jib trim, for and aft? I looked at the pictures posted by Yurdle but they don't relate to my boat. Help! -
- Rank: Mate
- Registered: Feb 19, 2008
- Last visit: Aug 26, 2023
- Posts: 671
Posted: Jul 02, 2012 - 12:54 AM
on a 1982 5.2 put the jib blocks on the jib wire so they can freely run up and down the wire
then run a line from the jib block back along the jib wire to the rear beam saddle, run the line through the saddle and tie a large stopper knot so it can't pull through
http://www.thebeachcats.c…ictures/?g2_itemId=79236
Edited by erice on Jul 02, 2012 - 12:58 AM. -
- Rank: Lubber
- Registered: Aug 25, 2010
- Last visit: May 07, 2014
- Posts: 94
Posted: Jul 02, 2012 - 08:07 AM
Yeah, right- 4 way. I have never had the guts to adjust the position of the blocks while underway.
--
Eric C
Force 5 project boat
Unnamed
Previous boat
1980 Nacra 5.2
"Double Vision"
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Jul 02, 2012 - 01:20 PM
Can you post pics of yours then?
--
Rob
OKC
Pile of Nacra parts..
--
