|
IMG00045-20120513-1235_edited
G-Cat a little dirty, but hulls in good shape....
Date: 05/13/2012
Views: 1292
|
IMG00046-20120513-1236_edited
...as can be seen from this pic...
Date: 05/13/2012
Views: 1055
|
IMG00047-20120513-1237_edited
....trailer is in very good shape....
Date: 05/13/2012
Views: 1056
|
IMG00048-20120513-1237_edited
....very light cat to trailer....
Date: 05/13/2012
Views: 1096
|
|
IMG00049-20120513-1237_edited
.....made by Barry, Sarasota, FL....
Date: 05/13/2012
Views: 853
|
IMG00050-20120513-1238_edited
.....hulls are solid, albeit a little dirty...
Date: 05/13/2012
Views: 1155
|
IMG00051-20120513-1301_edited
....oh, no! darn mice....got the jib...
Date: 05/13/2012
Views: 981
|
IMG00052-20120513-1301_edited
.....main sail in awesome condition....
Date: 05/13/2012
Views: 1068
|
|
IMG00053-20120513-1302_edited
....a few extras....
Date: 05/13/2012
Views: 999
|
IMG00054-20120513-1302_edited
....rudders look like new....got both tramps, but they will have to be replaced...
Date: 05/13/2012
Views: 1158
|
IMG00057-20120513-1413_edited
.....poliprep, hard brush and scouring pad, a little elbow grease.....
Date: 05/13/2012
Views: 1102
|
IMG00055-20120513-1352_edited
.....before and after....
Date: 05/13/2012
Views: 1062
|
|
IMG00056-20120513-1353_edited
....looking good....
Date: 05/13/2012
Views: 980
|
IMG00058-20120513-1413_edited
ohhyeahh!
Date: 05/13/2012
Views: 1087
|
pic 1
shroud pin and anchor bar situated on G-cat
Date: 05/28/2012
Views: 995
|
pic 2
....what it looks like removed from hull...
Date: 05/28/2012
Views: 957
|
|
pic 6
....pigtail tang.....
Date: 05/28/2012
Views: 926
|
pic 5
....with anchor bar....
Date: 05/28/2012
Views: 992
|
pic 7
....jib sheet blocks....thanks to Mr Berger....
Date: 05/28/2012
Views: 1129
|
pic 9
...barber-haul attached to pigtails, note tramp lacing....
Date: 05/28/2012
Views: 1032
|
|
pic 10
....turning the corner on the tramp lacing...
Date: 05/28/2012
Views: 1033
|
pic 11
.....barber-haul pigtail to pigtail....
Date: 05/28/2012
Views: 1121
|
pic 14
....jib block attaches to outer thimble on pigtail....
Date: 05/28/2012
Views: 1184
|
pic 12
.....close up of barber-haul....
Date: 05/28/2012
Views: 1081
|
|
pic 13
.....v-jamb block on barber-haul....
Date: 05/28/2012
Views: 1170
|
102_3582
....fixed mast rotator spar needed to go....
Date: 07/28/2012
Views: 1331
|
102_3585
....so I cut it off....
Date: 07/28/2012
Views: 1053
|
102_3586
.....removed mast base.....
Date: 07/28/2012
Views: 1061
|
|
102_3587
......to see how it looks, drilled out holes to 1/4 inch so I could add pivoting mast rotator arm.....
Date: 07/28/2012
Views: 1029
|
102_3588
.....ordered from Murrays with 4" long SS bolt.....
Date: 07/28/2012
Views: 1016
|
102_3589
......reinstalled mast base with new mast rotator arm....
Date: 07/28/2012
Views: 1119
|
102_3590
.....now mast rotator arm will pivot out of the way so I can pin the mast base to the mast ball...
Date: 07/28/2012
Views: 1108
|
|
102_3591
.....now I can pin the mast directly to the ball....
Date: 07/28/2012
Views: 1112
|
102_3592
.....and I still have a mast rotator control arm to secure to the boom......
Date: 07/28/2012
Views: 1213
|
|
|
