Hey I need a traveler cam cleat for my 5.2 Any suggestionS?

--
Nacra 5.2
--

I think my boat uses a Harken 150


West Marine. http://www.westmarine.com…Num=10191&classNum=10239

Here are all the specifications. http://www.harken.com/Cat…mplementary-cam_kits.pdf



edited by: skarr1, Aug 18, 2010 - 09:27 PM

I have the older shiny metal toothed one, and I couldn't find a cleat to fit. I took my old one apart and cleaned it as best I could. It improved considerably, but still isn't as nice a harken cam cleat.

--
Rob
OKC
Pile of Nacra parts..
--

golfdad75

Hey I need a traveler cam cleat for my 5.2 Any suggestionS?

often it's just a single little spring inside that has broken. recently i had to replace both springs in my trav/cleat

total cost. $.60

Hey Andrew, I just noticed mine was not holding as well as it used to, (25th day on my boat this season) it sometimes slips the line, especially if wet.
I didn't look really closely, as I had to pack up the cottage & run out to Calgary to pick up my brother & kids. It did seem that one cleat was moving all the way in, the other very little. This leads me to believe that perhaps mine suffers from a broken spring.
Where did you get the replacements? I think there was a thread 6 months ago about this, did you Mcgyver a spring, or can you get actual replacements?

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--

our local repair guy stocks the springs. not sure where else besides harken or murrays to get one (not sure about murrays).

if you can't locate one i would be happy to get and mail you one or 2. these weigh nothing and i would simply throw them in an envelope (not the $30 in shipping we ran into with the fids)

Andrew..

Not a traveller but a my lower main sheet block arms lost their springs. Can I replace these?

yup, same deal.. its probably a harken and you can simply remove the cleat part.. pry off the red backing and access the 2 springs.

when i said my trav/cleat broke... i actually meant main blocks...

Harken. I was pulling little bits of spring steel out of em this summer but they still sort of work. That will save me some green. Many thanks.

I have been looking and cannot find one with fitting 2.5 inches apart. I guess I will hace to buy a harken or ronstan and drill new wholes.

--
Nacra 5.2
--

I have a spare traveler cam cleat, the old style with shiny metal cams if anyone is interested. Cams aregood, cam springs still strong.

--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
--

Turbo, how much for it??
I need to replace all old rigging on my hobie 14.

--
Tyler holmes
Panama city, FL

Boat whore
--

I have no idea how much this traveler cam cleat with bullseye fairlead is worth, what do you think?


--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
--

I dont know, 10-20 bucks?

--
Tyler holmes
Panama city, FL

Boat whore
--