Anyone seen one of these? Here is a guy selling instructional videos for building a catamaran from thinwall PVC and Wallmart cloth for sails.
http://www.rebelcat.com/index.html

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--

I'm speechless.

--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
--

Wow! it even has wings.

--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--

"Note: RebelCat 5 is designed for cruising on lakes, not ocean racing with one hull out of the water."

The video also says it has "wave piercing hulls".
I would actually take it for a sail if someone dropped it on my dock.

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--

I like the wings.

--
Mike Jenkins
1989 H18
Lexington, SC
--

Edchris177

The video also says it has "wave piercing hulls".

Note: The wave piercing hulls are made out of traffic cones.

Next time you drive into an unmarked pothole, just think that somebody just built their own catamaran!

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--

Quote

Note: The wave piercing hulls are made out of traffic cones.

I thought the video said you cut a slit top & bottom, then heated the PVC & bent it to fit?
I had to watch the entire video, was recuperating after a nasty NAcra day in 30 mph, & my buddy was slow on a beer run.
I also noticed that not a single segment showed the sewer tube cat under sail, they were all stills.
I don't imagine there was much shape to the home sown sail made with $1/yd Wally World fabric, but what the hell, it still would beat sitting on the shore all day.

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--

Edchris177

Quote

Note: The wave piercing hulls are made out of traffic cones.

I thought the video said you cut a slit top & bottom, then heated the PVC & bent it to fit?

Something I saw on the site said he had two methods and now recommends using 10 inch pvc and traffic cones (which have a 10 inch base) for the nose because it's simpler than the heat and shape method.

Still wonder what the source of the traffic cones is supposed to be.

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--

You want cones? Just pick a few up on the way to or from Island Hop. Every Interstate in Mississippi is under construction.

--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--

Wolfman

I'm speechless.

I'm shocked.

--
Philip
--

I know the University of Alabama PD is missing a few orange cones. Always seems to happen around homecoming ! Dont ask how I know this or where they end up.

--
Griff
Hobie 16
Tuscaloosa, Alabama
--