Hi All,

Can anyone tell me the diameter of the P16 Prindle shroud anchor bar? It looks like 1/2" but that's too big right?

pics here:
http://www.murrays.com/mm5/graphics/00000001/50-50101701.jpg
http://www.murrays.com/mm5/graphics/00000001/56-1014.jpg

Damien

I cant be absolutely certain but 1.2 is way to big probably 3/18 but I'd have to measure. Search Prindle on Murrays so you make sure you are seeing the one for prindle. I am pretty sure the ends are not rounded like that.



Edited by Quarath on Sep 06, 2011 - 02:26 PM.

--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--

1/2 " same as H-16 Pete

Wow good to know. I have a couple loose ones in a box at home and I sure don't remember them seeming that thick, but I guess the bolts going in them are fairly large so they would need to be.

--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--

Thanks all - very helpful