Does anybody have a source for this older decal?



I want to add them to my newley painted hulls!



--
Gray Amick
Chapin, SC
'77 NACRA 5.2
--

You could try mailing nacra Europe. But I don't think it's likely they have them.

--
Stefan, Denmark.
H14,H16,P16,P18,SC17,N5.8
Team StaySail
http://www.staysail.eu
--

Sharp looking hulls, bud. I scraped what was left of mine off and replaced with my custom-ordered decals. Looks much better. I googled your location. I'm a lake sailor in Northeast Georgia. Maybe we can hook up, sometime?

--
Eric C

Force 5 project boat
Unnamed

Previous boat
1980 Nacra 5.2
"Double Vision"
--

I have vector files for 2 versions of the decals.. You can take them to a sign shop to have them produced. I had a request for a set last week but have been to busy to get them out to him. ( sailed sat and Sun !!),, PM me with a email address and I will get them out this week for you both.. Cheers Hal

--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness

I Need a A Cat Please
--

i had decals made for my 18 square by taking a picture of a nacra 5.2 decal off my computer and texted the picture and the dimentions for it with 18 square instead of 5.2. to a decal maker with my credit card info. and a few days later i had my decals. you can have them made larger or smaller than the ones in the picture as well as your choice of colors.
marc

I'm right down the road from you Gray on lake wateree, 40 minutes. I've got another friend on Murray who I sail with from time to time. Let me know if you're interested in getting together with us...

--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
--

Great to hear there are a few cat sailors around here. We should all get together some windy day.

--
Gray Amick
Chapin, SC
'77 NACRA 5.2
--

Gray, can you confirm that it is a single decal, in that shape? It looks like the older decal, (they were a single line, NACRA 5.2) was cut in two pieces, with the 5.2 being placed below NACRA.
ERICE, from Japan sent Wolfman & myself a bunch of the old classic decal, in either red or blue.
PM me an email address, when I leave the lakehouse I will take a digital photo of the decals & send it to you. If they are what you are looking for, I'll send you a couple.

--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--

Gary

Your hulls look GREAT! what did you use to paint them with? did you brush & roll or spray?

I am about to paint my boat and have not decided on what paint to use.

Thanks

--
Jeff O
N5.0
solcat 18(sold),
N5.2,
H16
Camarillo CA
--

Thanks Jeff.

A good buddy of mine taught me the "roll and tip" method. We sanded the hulls with 80 grit paper, fixed a couple spots with 610 epoxy and painted with a thin foam roller followed by smoothing out with the "tip" of a brush. We used the paint below with ~10-20% penetrol added.



Here is the before image:





--
Gray Amick
Chapin, SC
'77 NACRA 5.2
--

Ed,

It looked like what you described, a single decal cut and placed as in the pic. I would be very greatful if you have an extra set laying around. I pm'ed you my email address. Thanks.

Gray

--
Gray Amick
Chapin, SC
'77 NACRA 5.2
--

I am painting my hulls as well. I got a little nutty with the Gimp http://www.flickr.com/pho…/hansoncoyne/7207331890/

It's a pretty good knock off.



Edited by nhanson on May 15, 2012 - 10:44 PM.

--
nacra inter-18
CNBP
--