Need tips for hauling beach wheels on a p16

pknapp66
pknapp66
Mate
  • Rank: Mate
  • Registered: May 09, 2009
  • Last visit: Aug 14, 2024
  • Posts: 686
Link to this post Posted: Aug 25, 2012 - 02:28 PM
No room under the boat on the trailer. Any good ideas on securing the wheels on the boat?

--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
pknapp66
pknapp66
Mate
  • Rank: Mate
  • Registered: May 09, 2009
  • Last visit: Aug 14, 2024
  • Posts: 686
Link to this post Posted: Aug 25, 2012 - 03:19 PM
Looks like I solved my issue with 2 canoe carrier foam blocks. The wheels won't bridge the P16 hulls.
Still open to any other ideas.

http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=89348&g2_serialNumber=4

--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
Quarath

Mate
  • Rank: Mate
  • Registered: Jul 06, 2008
  • Last visit: Jul 19, 2018
  • Posts: 986
Link to this post Posted: Aug 26, 2012 - 02:00 AM
That is pretty much how I haul mine. I made some foam pads but I like your canoe pads are those something fairly cheap?

--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
pknapp66
pknapp66
Mate
  • Rank: Mate
  • Registered: May 09, 2009
  • Last visit: Aug 14, 2024
  • Posts: 686
Link to this post Posted: Aug 26, 2012 - 05:18 AM
Had them forever, but I know you can buy them individually pretty cheap. They have a cutout
for the canoe rail that fits the tube quite nicely. They are very dense foam. My axle has a sleeve
on it so I am going to replace the bolts in the sleeve with eye bolts for a better tie down point.

--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--