Hi,
In my search for a affordable tilt-trailer I came across this.

http://www.youtube.com/watch?v=y8JrczKBzyA

Think its brilliant !

Grtz, André

--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.

Amsterdam, the Netherlands
--

This trailer is right here at the Beachcats, and is more affordable. And probably where that guy got his idea from (note date of 2002, I think he built it in '01)

http://thebeachcats.com/pictures/?g2_itemId=11313

are there detailed plans for the tilt trailer pictured on the site? it looks simple to do with detailed plans.

The Tilly Trailer mentioned by Jay is by far the coolest in operation, but this one built by Mike Krantz for his Carbon 20 (10.5 feet wide) is the simplest one I've seen.

One man operation, no motors, cables, or winches, just two hydraulic struts.

video and bigger pictures in the Tech gallery.
http://www.thebeachcats.c…ctures/?g2_itemId=101149



--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--

Now I remember why I have a road legal width cat. Cool ideas though. Ricardo

--
Lake Perry KS
H-18
N-5.5 UNI +spin
--

we sail with a 10' mystere 6.0xl

i have skippered it in pretty heavy air (on a day i wouldn't sail mine)... sailed like a dream

Here is a link to a simple trailer built by one of the guys that worked at Sailcraft.

http://www.pbase.com/d30/gallery/full_tilt_trailer

--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--

i am checking on a special permit on wide trailer loads. i will confirm on mon. if it is possible and the price. it looks like one is avalable for wide cats in fl.

in south carolina 10'width is legal. in fl. a special permit is required for 11' width. a one time permit is 5-25$ a annual permit is over 300$ .

I was thinking to do this to my trailer! But i have no idea if its even possible , my boat is 12.6 wide so i dont know if this would work

--
1980 Reynolds 21 Catamaran #38
1988 Farrier 27 # 31
2002 Hobie Getaway
Pennsylvania, PA.
--

marcs2

in south carolina 10'width is legal. in fl. a special permit is required for 11' width. a one time permit is 5-25$ a annual permit is over 300$ .

Would you mind sharing where you got that spec on SC trailers? I've have always found a legal trailer width limit of 102" which I believe is a federal limit.

By the way, you will need an oversize permit for EVERY state that you travel through. Some of them are not as easy to get. I know a guy in GA that has 10.5' trailer and wanted a annual permit that is talked about online, the state would not issue him one. He takes his chances with no issues, but he also pulls that trailer with an RV so it does not look as wide.

--
Greenville SC

Offering sails and other go fast parts for A-class catamarans
--

the 10' width is legal in North Carolina according to discover boating. not S.C.

I guess my idea s are totally out of question. If I need a permit! To much work.

--
1980 Reynolds 21 Catamaran #38
1988 Farrier 27 # 31
2002 Hobie Getaway
Pennsylvania, PA.
--

It's not quite as simple as up to 120" but the boat exemption makes sense.

Quote

(m) Notwithstanding subsection (a) of this section, a boat or boat trailer with an outside width of less than 120 inches may be towed without a permit. The towing of a boat or boat trailer 102 inches to 114 inches in width may take place on any day of the week, including weekends and holidays, and may take place at night. The towing of a boat or boat trailer 114 inches to 120 inches in width may take place on any day of the week, including weekends and holidays from sun up to sun down. A boat or boat trailer in excess of 102 inches but less than 120 inches must be equipped with a minimum of two operable amber lamps on the widest point of the boat and the boat trailer such that the dimensions of the boat and the boat trailer are clearly marked and visible.

--
Greenville SC

Offering sails and other go fast parts for A-class catamarans
--

Like Damon's post best, if I can't sell the P 18-2 with trailer this
spring, I will build a Steve Krantz - like design, simple and light.
As a base for that I'm planning to use a second hand 2 axle trailer.

André

--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.

Amsterdam, the Netherlands
--

It is NOT Steve. His name is Mike Krantz.

--
Philip
--

mummp

It is NOT Steve. His name is Mike Krantz.

Oops, fixed my post. Funny thing, I think the Carbon 20 and trailer from my earlier post is now in the classifieds.

http://www.thebeachcats.c…516-nacra-carbon-20.html

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--

DamonLinkous

mummp

It is NOT Steve. His name is Mike Krantz.

Oops, fixed my post. Funny thing, I think the Carbon 20 and trailer from my earlier post is now in the classifieds

You are correct

--
Greenville SC

Offering sails and other go fast parts for A-class catamarans
--

mummp

It is NOT Steve. His name is Mike Krantz.

Sorry, my fault, for once I did not copy/paste a name and immediately
I made this mistake.

André

--
Tornado (80's Reg White)
Prindle 18-2 (sold)
Dart 16 (hired and hooked)
13 mtr steel cutter (sold)
Etap 22, unsinkable sailing pocket cruiser.

Amsterdam, the Netherlands
--