Looks like bungee would be easier to install, but wouldn't rope allow tighter fit especially if non-sagging (when wet) rope were used? Rope is there now, but it's got green algae all over it and needs replaced.
--
Goodsailing
Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
Referbing Older Hobie Cat 18--Rope or Bungee for tramp?
- Rank: Mate
- Registered: Feb 18, 2013
- Last visit: Jul 19, 2015
- Posts: 396
Posted: Feb 09, 2015 - 07:20 PM
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Nov 21, 2024
- Posts: 964
Posted: Feb 10, 2015 - 03:49 AM
Don't use bungee.
Use solid line (1/4" pre-stretch). Tighten the tramp incrementally until it is drum tight. Don't try to do it all at once or you may pull out a grommet. For the cleanest results, start with the aft lacing first and then do the center lacing.
sm
Use solid line (1/4" pre-stretch). Tighten the tramp incrementally until it is drum tight. Don't try to do it all at once or you may pull out a grommet. For the cleanest results, start with the aft lacing first and then do the center lacing.
sm
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Feb 10, 2015 - 07:15 AM
+1
- Rank: Mate
- Registered: Jan 21, 2003
- Last visit: Feb 10, 2015
- Posts: 115
Posted: Feb 10, 2015 - 08:50 AM
Install it on a warm day too, so the tramp will be more pliable.
--
Jeff
Houston TX
1986 Hobie 18 Sail# 13031
--
--
Jeff
Houston TX
1986 Hobie 18 Sail# 13031
--