Sounds fast?

This is a 12 foot catamaran with white planning hulls, no dagger boards are needed. It comes with a Skip Elliot designed Mylar main sail and a canvas jib for a total of 185 sq.ft. sail area. Trapeze and harness, Harken hardware. It is in excellent condition, fun to sail and very fast.

https://www.ebay.com/itm/…245a6:g:hicAAOSwEgZZf5OC



Edited by schoen.steve on Mar 04, 2018 - 03:06 PM.

--
Steve
Nacra Inter 20
Okemos Michigan
--

Strange hulls, but, cute little cat.

--
Marty
1984 Hobie 16 Redline Yellow Nationals, "Yellow Fever"
Opelika, Al / Lake Martin
--

Would love to hear from anyone with experience on this cat.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--

Check out that mast rake.
24 foot mast on a 12 foot cat.
6 inch draft (max).
It has a higher sq. ft. of sail to hull length ratio than any beachcat without a spin.
Sounds like a wild ride in the ocean (survival situation)!





Edited by klozhald on Mar 05, 2018 - 11:14 AM.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--

klozhald

Would love to hear from anyone with experience on this cat.

Me, too....especially about pitchpoling!

--
Jerome Vaughan
Hobie 16
Clinton, Mississippi
--

WAIT!
Twin ice coolers built into the hull!

I am in!!!!





Edited by MN3 on Mar 06, 2018 - 10:54 AM.

Quote

It has a higher sq. ft. of sail to hull length ratio than any beachcat without a spin.
Sounds like a wild ride in the ocean (survival situation)!

Don't worry - "The Quinsea doesn't heal over like other cats. It out performs boats twice her size"

MN3

Don't worry - "The Quinsea doesn't heal over like other cats. It out performs boats twice her size"

I hear you.
If this were true, we'd have heard about his wonderful vessel before now.

With six inches of draft I bet it falls right over with any heeling at all, due to having virtually no bite on the water at that point.

It occurs to me that those hulls would be great for a pontoon bass boat. I wonder if that might have been the designer's experience. No experienced shipwright would have designed any vessel without significant rudders, centerboards or a keel that would track through the water.



Edited by klozhald on Mar 08, 2018 - 11:50 AM.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--

Not to be an anarchist here, but some of the features....could work.
Admittedly, I have never sailed one of these, and the hull design does seem like it would lend itself more to a bass boat.
However, I did own an Edelcat, Savage 15 which had no daggers and it's rudders were no deeper than the bottom of the hulls. This (rudders) made it really easy to launch and land, and surprisingly nimble. I could easily pull a hull and it was very stable while on the wire. It was far and away the easiest boat to maintain a lifted hull and incredibly forgiving.
Granted, the hull design was much more like what we all are used to, so I likely agree that the advertisement is more marketing hype than reality, but I just wanted to point out that a similarly (somewhat) designed rudder system on the Edelcat worked really well.
Unfortunately, my Edelcat was broken up in a N'easter a number of years back. Images in the gallery here.

--
Supercat 15
Windrider 17
Several Sunfish and Sunfish clones
Ratboat built from Zuma and Sunfish parts
Shallow water sailor in the Delaware Bay
--

This boat probably was fun and fine for what it is, a low performance easy and fun boat

I bet it didn't point to well, and would be a real nightmare in a strong current but fun and fine on a lake setting