Have an end pole snuffer. Anyone know where to get, the part number, or what to do about replacing the plastic piece in the end with the hole that attaches to the cross-bar? Been searching Murray's/ H20 Sensations but all the end caps I find seem to be for the mid-pole/smaller diameter.
Thanks for any help!
--
Steve
Nacra Inter 20
Okemos Michigan
--
Nacra Inter 20 Spinnaker Pole Question
- Rank: Lubber
- Registered: Apr 28, 2014
- Last visit: Aug 18, 2023
- Posts: 91
Posted: Aug 02, 2020 - 04:57 PM
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Aug 02, 2020 - 06:20 PM
Try Rick Bliss at New England Catamarans. He is a Nacra dealer and should be able to help you out.
Pete
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
Pete
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
- Rank: Mate
- Registered: May 09, 2009
- Last visit: Aug 14, 2024
- Posts: 686
Posted: Aug 02, 2020 - 07:11 PM
This one at Murrays says it is 2 inch. What I.D. is your pole?
https://www.murrays.com/product/56-9631/
Pete
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
https://www.murrays.com/product/56-9631/
Pete
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
- Rank: Lubber
- Registered: Jul 05, 2018
- Last visit: Jul 06, 2023
- Posts: 63
Posted: Aug 03, 2020 - 09:18 AM
There is one on ebay. Spinnaker end pole snuffer hoop
Edit: after re-reading your post, your looking for the pole cap. Not the snuffer hoop.
Edited by geepaks on Aug 03, 2020 - 02:55 PM.
Edit: after re-reading your post, your looking for the pole cap. Not the snuffer hoop.
Edited by geepaks on Aug 03, 2020 - 02:55 PM.