Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: standing rigging tension

[quote=skarr1]Did someone add a roller furling to the fore stay? The mast ball height is determined by preloading the front cross bar. The rod should forced down by the bottom nut till the center of the cross bar is about 1/16" to 1/8" inch higher than the ends. The ball should be tightened till it bottoms out on the rod. [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.