[quote=HULLFLYER]The springs are not the adjustment. The stainless steel cam is the part that needs to be adjusted, by moving it in or out as needed. First loosen the nut on the outside of the cam, then put a screw driver or something in the hole where the half moon washer and nut are and turn the cam to loosen the nut. Then you can move the cam in or out to adjust. Retighten and make sure the cam is lined up properly and put the rudder in the lock down position. It is easiest to do if the boat is on a trailer or cat trax, as it may take 2 or 3 times to get it where you like. It should require some pressure to pull the rudder up by hand so it stays down while sailing but not too much as you want it to kick up when hitting the beach.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
