[quote=Spray_in_the_face]Yup, Screwin g in or out adjusts the rake. I put two small hose clamps around 3/4 of the two springs to force them to tighten. This definitely helps but doesn't seem to be enough to keep the rudder in at high speed. Two possible solutions: 1) the pin that part hooks to, turns when the rudder gets pulled out. Not allowing it to turn may make much harder for it to come out. 2)as a last resort possibly file out a little material at the base of the catch area of the pin. This would allow it to seat better. [/quote]
No HTML tags allowed (except inside [code][/code] tags)
