[quote=phoenixone]Would suggest also that you buy some easy outs at the hardware store...drill the center of the bolt no more that 1/3rd of the diameter and slide easy out in AFTER you soak whats left of the bolt with some Penetrating Oil. Alternatly TIGHTEN AND LOOSEN using the easy out. It should break loose. I would caution AGAINST using WD40 as it retains moisture. Drilling out the bolt and removing whats left of the old bolt from threads is a last resort. If that is to be the case you can redrill a slightly larger hole and retap it and insert a HELICOIL to bring thread back to the original size and insert a new stock size bolt. Good luck.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
