[quote=yurdle]Wolf - The 18 has a different system than the 18-2, which is what has the 4-way. The 18 you set and forget with a single line going between the jib blocks. The line runs through some grommets in the tramp that can move the blocks forward and back a touch, depending on the grommets used. You can't reasonably adjust it on the water.
I'll try to find another pic. I was just looking through pics on my network for that one -- I don't have the opportunity to go take one before next week, as there's an event in Houston this week I think I'm going to have to attend. =)
Pirateboy - you might have to use some imagination, or else be more specific about how I can help. I don't think this setup is technically impossible on a P18, but its pretty impractical the way the main beam is set up, especially since most P18s already have a barberhauler.
As far as the cleating issue, if you've already tried adjusting the cleat position on the block, try using a larger line. 1/4" line on a jib sheet can be a total bitch to pop from the cleat if the jib backwinds. 3/8" practically jumps out.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
