[quote=Wolfman]The Sailbox boxes are the Cadillac of all sailboxes. I don't think there is a better one out there (hence the price).
If security isn't an issue you can make one with 1/4" or 3/8" exterior grade plywood, spf (spuce,pine,fir)2x2's for an interior frame and decking screws.
Cut the boards to size (normally 24" wide by 18" tall by 8 ft long because the plywood can only be bought in 8 ft lengths). You should cut up 2 sides 18" by 8ft, one bottom 24" by 8ft 2 ends 24" by 18" and 2 top pieces which will be 4 ft long by 25" wide, one top piece and one end piece will be the doors.
Screw 2x2s along the perimeter of the 2 sides. Attache the bottom to the sides and run 2x2s accross the bottom and top at each end and half way for reinforcement. Screw half of the top and one end to the sides to make a partial box. Use strap hinges and a gate hasp to put and end cover and top opening on the box. Paint the outside so it won't rot.
That's a really simple one that will be relatively light and as long as you use full 8 foot pieces it should hold up for quite a few years. I would screw every 6" along the 2x2s with 1.5" decking screws and and it wouldn't hurt to use construction adhesive for extra stiffness. [/quote]
No HTML tags allowed (except inside [code][/code] tags)
