Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Mast Rake

[quote=Edchris177][quote]Also, I think it's crazy that you or anyone use something larger than 3/16" for rudder lines.[/quote] I used 1/4" because I bought a bunch of it for other purposes. What would be a disadvantage of using 1/4" over 3/16"? I can't see 1/16 making any difference, there is plenty of room for the 1/4" to run through/over the rollers & it cleats fine in the pivmatics. I know what you mean about not being able to cleat from the wire, it is hard to hold the line in a blow & pull upwards enough. You can make it easy to cleat by changing the angle settings on the upper Harken block, but that will also change the way it UNCLEATS. I may change mine a bit next season, but for now I want it to UNCLEAT with a pull from any direction.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.