[quote=Edchris177]The ball is actually pretty good, the bolt doesn't quite touch it, but yeah I've been meaning to remove it.
If you look at my base, there are two sets of holes. A small corner of the casting near the rear hole, on the opposite side is broken off. I believe the previous owner demasted, or dropped it with the pin in, then drilled the other set of holes.
If Dan has a base with only a corner missing perhaps Indy can pick one up cheap, then drill new holes on the other end.
Indy, replace those old trap lines, if they break you get dunked, & lose the dogbone($15 min). Relace the tramp with 2 pieces of low stretch/creep line. Use 3/16" line, 1/4" is fine for the side lace, but hard to fit through the slugs on the rear beam. Grab it with pliers & pull it tight, then a little more. It is probably time to replace the forestay & shrouds too. If you break one it may be way more $$$ than the cost of a new stay, & you may lose a season if you break the mast, or your head. If your trap wire have any broken strand replace them, Dave sent me a box with more than I'll use. If you need one let me know.
Dave, get back to work & quit posting on company time, lest you get busted like Andrew.:lol:<!-- editby --><em>edited by: Edchris177, Sep 14, 2010 - 03:37 PM</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
