[quote=sax2ter]JB weld sounds like a good idea, but I would have to contain it somehow to the area just in the center of the tie rod. I suppose I could drill out the rivets holding the end pieces on, and use a dowl to "drift" a piece of styrofoam into position just a few inches on either side of the worn out hole in question, (which would contain the JB weld nicely). Then I could fill with JB weld using a syringe, and then re-drill a new hole in the exact same place the hiking stick was attached before. Sounds like a bit of work, but may just do the trick![/quote]
No HTML tags allowed (except inside [code][/code] tags)
