[quote=Wolfman]You can, but I looked into it pretty seriously and didn't (and I'm the biggest high tech nut there is). To get line that is suitable is more expensive than ordering the wires and you need to get the eye splices done (I don't trust myself enough to do it). They you should also get them coated near the attachement points or wherever they may rub. Even with all that you are saving very little as far as weight, spending a lot more money and it still may dump you in the drink unexpectedly.
If you are looking for a 'gentler' wire, go with a PVC coated trap wire. YEah I know everyone here recommends against them, but honestly if you keep an eye on the ends (where the corrosion and fraying are going to happen) and plan on replacing them when the coating becomes brittle you will be OK. There is a reason that all the manufacturers sell their boats with coated lines stock.
If you are planning on going high tech the way to go is PBO rigging. A coated fiber product. Again Super Expensive and if you are outfitting a 5.2 well it's like giving octomom a silk purse... or somthing like that. :) You are better off saving up for a carbon mast the provides some discernable benefit in weight and performance and could be reused on a newer boat eventually.
D.[/quote]
No HTML tags allowed (except inside [code][/code] tags)