[quote=turbohobo]The bridle wires attach to each end of your front beam, the other end of these wires join together using a bell shackle, attach the 10 hole stay adjuster to the bell shackle at the shackle pin. Your forestay would then connect to the 10 hole stay adjuster at any one of the 10 holes to tighten/loosen your rig. Check out the following link, it is a H16 forestay but would be the same setup for your cat, was the best pic I could find for you.
[url]http://www.cfycc.com/documents/dinghy/hobie_rigging_basics.pdf[/url]
check out the 4th pic, hope this helps
Turbo[/quote]
No HTML tags allowed (except inside [code][/code] tags)
