[quote=yurdle]I [i]do [/i]get out to California, careful what you offer. =)
I made an album. It's not super thorough, but hopefully gets the point across.
[url=http://www.thebeachcats.com/pictures/?g2_itemId=83788]5.2 jib traveler setup[/url]
The slot on a 5.2 is very tight -- too tight if you use the default jib wire locations and don't use a barberhauler. So, either use a barberhauler, or move the front eyelets (just add new ones) outward on the main beam. I put mine underneath as I run the front of the line/wire under the tramp -- the slots on the tramps are in all different locations so this is skipper's choice.
Like I've said before, I actually use a couple inches of barberhauler going upwind on the 5.2 to open the slot a bit. Otherwise they feel all powered up and go nowhere.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
