[quote=erice]there should be lot on this in the forum archives that can be found by searching and also photos in the galleries here
- basically if you want to remove the tramp tube you will need to stainless/monel rivet the front beam straps to the beam to stop it rotating
- the jib wires can go under the tramp if the saddles are also moved below but the wires will need to be slightly longer to do so, or use a high tech not-stretch line
[url=http://www.thebeachcats.com/pictures/?g2_itemId=83788&g2_GALLERYSID=1ff37e725287ad5554a7fb8ad8690b6a]http://www.thebeachcats.com/pictures/?g2_itemId=83788&g2_GALLERYSID=1ff37e725287ad5554a7fb8ad8690b6a[/url]
[url=http://www.thebeachcats.com/pictures/?g2_itemId=74166]http://www.thebeachcats.com/pictures/?g2_itemId=74166[/url]
- most people cut slots in the tramp to bring the wires up for the blocks with sewn on reinforcing, but i decided on plastic eyelets, you just have to be very sure of where you want the blocks to go
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=79239&g2_serialNumber=3[/img]
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=79240&g2_serialNumber=3[/img]
- i thought the tramp tube disappeared from the 5.2 before 1985...what's the hull number at the back of the boat?
- later 5.2's, 1985 onwards?, had the jib block position moved out closer to the hulls, that's the position you want to copy
a few of the previous threads
[url=http://www.thebeachcats.com/forums/viewtopic/topic/12097 ]http://www.thebeachcats.com/forums/viewtopic/topic/12097 [/url]
[url=http://www.thebeachcats.com/forums/viewtopic/topic/437]http://www.thebeachcats.com/forums/viewtopic/topic/437[/url]
[url=http://www.thebeachcats.com/forums/viewtopic/topic/13308]http://www.thebeachcats.com/forums/viewtopic/topic/13308[/url]
[url=http://www.thebeachcats.com/forums/viewtopic/topic/11816 ]http://www.thebeachcats.com/forums/viewtopic/topic/11816 [/url][/quote]
No HTML tags allowed (except inside [code][/code] tags)
