[quote=dtfuqua]The deck one one of my hulls was so bad, I could flex the inner as well as the outer shells. I have used 1 gallon and 1 quart of epoxy resin to do just the tops of two hulls. There were some places where the epoxy leaked into the inside on the hull so if I had been more observant, I probably would have gotten by with just 1 gallon. Some spots didn't get hard with the first application and I drilled more holes in the areas that needed more epoxy injected and injected more epoxy. I mean this hull was as soft as a mattress. It is pretty much solid now. I used a cheap brand of epoxy that I believe is the same as some expensive brand name. I has the color change to red to tell you when the mixing is thorough. I only use the high density filler to make a paste to fill holes that had recesses in the surface after it hardened. Just keep at it.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
