Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle 16 rudder adjustment

[quote=Quarath]I have been struggling a bit with mine on my p18 of late as well. I have them all the way in and this good when testing on dry land but not so much when sailing. If I back them one turn out then they are to loose and come up to easily when sailing. As they are now the problem seems to be no that they kick up but that they are never getting fully locked in so they begin to come up at speed. Though mostly they only seem to come out a little but it is enough to make the helm too much to hold a course. I sail quite often off a very shallow shore line so I have to get out a ways before I can really lock them in. I have to have them down some though so I can maneuver. This makes them mostly down but not locked when I get deep enough and leaves very little leverage to them locked. If I can on the windward side I pull it up and try to quickly slam it back down to lock and this sometimes works. This can be hard to do on the leeward side depending on conditions and my crew is usually one of boys and they don't have the strength to pull up by rope alone. I have new springs and bolts (not the hooked bolt) but all the other parts are original. I think I will have to pull the entire hook bolt out and take a good look. They don't look bent at all to me but who knows.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.