[quote=klozhald][quote=bender1989]Im about to replace the shroud wires on my 1984 Hobie 18 but I'm not sure if its a SX or a Magnum. What was the first year for the Hobie 18SX?[/quote]
Use two screwdrivers, one in each end, on the thimble or fork hole of the shroud and measure from the outside of each screwdriver. This is the best way to determine what you need in a shroud.
If you are using a shop to make the shrouds, take a picture if you can of the end measurement and send it to them.<!-- editby --><em>Edited by klozhald on Nov 15, 2012 - 12:06 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
