[quote=klozhald]From the McLube site:
OneDrop™ Ball Bearing Conditioner & Lubricant: Application Guide
•Squirt water and dish soap into shackle openings. Roll car back and forth on track several times to clean ball races. Flush well with fresh water while rolling car back and forth. Allow time to dry
•Remove cap and cut off tip of sealed pinpoint dispenser
•Apply 1-2 drops of OneDrop™ to ball contact surfaces of track
•Roll car back and forth through the OneDrop™ several times to distribute onto bearings.
•Wipe any remaining OneDrop™ off track
[i]And yes, according to the MSDS release One Drop is 97% mineral oil, which makes it nearly identical to 3 in 1 oil (which also contains 2% naptha and parafin), Singer Sewing Machine Oil and Marvel Mystery oil- excepting that MMO has a red stain which I do not want on my catamaran.[/i]
[b]So in the end it's clean it with soap and water and then put in a drop of your favorite mineral oil after it dries.[/b]
Whew.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
