[quote=azcat]Marcello
The rudder head is cracked in two places at the upper mount hole. I asked you specifically if there were cracks in that area, your response was "NO" " How could it be, it was never mounted on a boat" I asked if I was new. Your response"Yes"
The rudder castings.
Marcello, they are trash. Not opinion, fact. And there is no way that you didn't know this. One of them was sawn off a rudder with a hack saw. The pintle eyes of both are frozen in and cannot be removed. One of them has been sawed off with a hacksaw, the other pintle eye shows signs that it was put in a vice and was twisted out of shape because it would not come out.
Diamond wires. dielectric corrosion. Do some research before you sell things that could damage an unsuspecting NEW sailors boat.
Rudder bolts for i20. Are for H18, nowhere in your add do you mention H18 rudder pins.
SS bolts. "The bolts were packed and I had no way to know they were from a cat trax."
The instructions for installation of the "bolts" for mounting cat cradles to cat trax was clearly visible in the same bag as the bolts! It says on the instructions what they are and wha they are for. Rudder bolts?
Tendons. Cracked
Mast balls, good
Springs, good
$40 should cover that
I go to my credit card companies next and bring fraud charges. Your move. $300 plus shipping, I'll give you $50 for the mast balls and the springs. Done deal.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
