[quote=benedict]Man, this is great information. Thanks, everyone!
Not sure I've got the 10' wide P-Cat. I'll go out and measure it tomorrow, but I'm almost certain it's narrower than that.
And thanks for the advice on paint vs. gel coat. Since the non-skid is so cracked through, I'll probably have to grind it off, anyway, just to make sure I get to the bottom of all the cracks. Far as I can tell the underlying glass is fine, but that'll give me a chance to inspect it, anyway.
On painting, I've read here that people have added grit to urethane paint to paint on non-skid after the decks have been done with smooth coats. Is this how you'd go about restoring the non-skid on the deck? Or would you use adhesive tape or something else that could be renewed every few seasons?
Jack, if you have any close-up pictures of your P2-18 deck, I'd love to see how you've got your running rigging set up. It seems like each generation of the P-Cat went through some pretty drastic changes in rigging. I'm still puzzling over the P3's jib sheets. If there's one thing with the P-Cat that drives me a little nuts, it's all the lines crossing the deck. I'd love to change how the jib sheets are done so they stay clear.
Thanks again!
Tom[/quote]
No HTML tags allowed (except inside [code][/code] tags)
