[quote=BobBill]Tom, I am no expert, but if those cracks are surface (gel) I would gouge them out with a a bit with a sharp tool and fill with good epoxy paste out of can, tube or made up, smoothing as much as possible and paint...
Matching paint might be more difficult than the filler...and not worry about it.
Once the boat is operating the degree of deck work will become more apparent. But, that is me and my two small boat(s), and your situation is likely not similar.
I was lucky, insofar as the cracks on my Kite dinghy were surface and not on molded anti skid.
On the cat hull, I had some fixing on the anti-skid and just filled and so on, forgetting about the looks, and it worked out...but that is me.
Good luck with the rigging...simple works.<!-- editby --><em>Edited by BobBill on Feb 16, 2014 - 04:49 AM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
