[quote=tominpa]I have done much better getting materials at Discount Marine h[url=ttp://www.discountmarinesupplies.com/ ]ttp://www.discountmarinesupplies.com/ [/url]. Same stuff, but much lower prices. You need fairing compound which can be simply glass micro fiber mixed with epoxy. Look for West Systems 403 micro fiber [url=http://www.discountmarinesupplies.com/West_System_Epoxy-West_System_403_Microfibers.html ]http://www.discountmarinesupplies.com/West_System_Epoxy-West_System_403_Microfibers.html [/url]. For fairing a project, I like a long flat sanding board. Only $8.00 at Harbor Freight [url=http://www.harborfreight.com/17-inch-auto-body-hand-sander-1727.html]http://www.harborfreight.com/17-inch-auto-body-hand-sander-1727.html[/url]
To build up the repair, you need woven mat for strength and rigidity. Chopped strand is okay for outer layers and finishes reasonably well, but this should do most of the repair with good Epoxy [url=http://www.discountmarinesupplies.com/Fiberglass_Material-Evercoat_Fiberglass_Cloth_Packs.html]http://www.discountmarinesupplies.com/Fiberglass_Material-Evercoat_Fiberglass_Cloth_Packs.html[/url]
You can skip the sprayer for gel coat. It would be easier to roll on, then blend with 120-800 progressive grit paper and finish with polishing compound.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
