[quote=tominpa]Going back to EdChris's idea of a mold, you could take a 1-2 layer mold of the other hull, and it should be close in shape to match the compound curves on the one being repaired. You would be swapping front to back, but it is going to be close enough. This assumes you fasten your mold over the outside of the hull and layup from the inside. You will need a release agent/wax on the mold.
BTW mask everything you don't want coated with epoxy. This stuff runs all over.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
