[quote=Dogboy][quote=jalex]Any trick to getting it lined up properly and drilling holes in the right places?[/quote]
Measure twice and cut once for sure.
If drilling a round tube (or any metal part really), be sure to center punch before drilling. Otherwise the bit will wander and your hole will never be in the right spot. Using a drill press is best if you have one.
If you need to cut the tube with a hack saw, a trick to keeping the cut square is to use a hose clamp around the tube at your cut line. The hose clamp will act as a guide for your saw.
sm[/quote]
No HTML tags allowed (except inside [code][/code] tags)
