Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Hobie 16 jib batten tension

[quote=martyr]Also, when you raise the mainsail and have it locked in at the top of the mast, you can take the halyard behind and around the shroud and trap wires and then cleat it off. This will keep the halyard farther back on the mast so that the jib won't get caught on it. Trim jib battens as suggested and you can also put a little tape on the batten ends as well and this will help the jib move across the mast. Tension battens just enough to remove wrinkles as suggested as well, and remember to cleat them.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.