Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra DS rod and sleeve

[quote=tnell]Thanks everyone for the quick replies!! Sometimes this place is silent for days but not this time! Here's my plan of attack... I don't mind buying all new parts from Murrays or Salty Dog so that's not an issue. My main concern (and I may be overthinking it) is that I will find the DS rod frozen in the compression tube. I searched and could not find again one solution which as I recall was... Loosen the bottom nut to gain some working room, then turn the top nut down thus raising the DS rod. If I can move it that way, I know it's not frozen and I should be able to proceed with cutting the bent part And then removing it like Edchris said to do. Once it out I'll make sure everything is well greased so the Next time I bend one I know it will come out easily. Comments or suggestions? Thanks again guys![/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.