[quote=Edchris177]It's pretty simple, i have spares of all the parts if you want to give it a try.
On the boomless, the wishbone goes forward, there are 2 different wishbones, a wide one, & a "V", I have them both. The rotator hole is drilled through the mast base, so it won't leak if you turtle. I think I have a spare mast base, already drilled.
This photo was when I first got the boat. There is quite a bit or force trying to twist the mast, 2:1 setup works much better.
The hardware is the same, you just change the line orientation. It should dead end with a Figure 8 knot at the left pad eye, (just beside the cleat), run out to the wishbone-through the "eye" at the end of the wishbone-back through the left cleat,(where you started)-around behind the mast-through the right cleat-out to "eye" on wishbone-back to right pad eye, & dead end there.
It becomes a continuous line & gives 2:1
[img]https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=74457&g2_serialNumber=7&g2_GALLERYSID=78aecf770b18906413840c4abad3e1b1[/img][/quote]
No HTML tags allowed (except inside [code][/code] tags)
