[quote=MN3][quote] so a straight drill out will be hard.[/quote]
a straight drill out would suck by hand on any rivet
I was taught to go very slow, use lube, a new or sharpened bit and angle the drill as much as i can with out it slipping off
and then i rotate around the rivet head and clockwise then counter ... working the rivet head off.. not the center
when the rivet "head" finally breaks off ... i use a small punch and knock it into the .... whatever it was riveted to
back to the question
IMHO:
go sail but I would fix it eventually<!-- editby --><em>Edited by MN3 on Nov 07, 2018 - 07:25 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
