Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra tiller crossbar ends

[quote=nacra55][quote=rch701]Option 1 [url]https://westcoastsailing.net/hobie-rudder-adjuster-kit/[/url] [url]https://www.ebay.com/i/132036647734?chn=ps[/url] Option 2 Nacra upgrade[url]https://www.murrays.com/product/56-5516/[/url] Option 3 Urethane Rubber [url]https://www.murrays.com/product/56-4536/[/url][/quote] Option 1 may not work with your crossbar length and just complicates a very simple system. Option 3 is for boats with tiller tubes bent at 90 degrees that line up with the crossbar. Option 2 is what I did years ago on a 5.5 SL, it requires drilling new holes in your tiller tubes and may require adjusting the length of your crossbar A temp and cheap fix is to use 2 zip ties in a cross on each end to stop the spinning of the connection. What has happened is that the weld has broken where the bolt is welded to the U shaped piece. Another option is to get that re-welded.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.