[quote=mattson][quote=MN3]I drilled 2 holes in the sidewalls of the track of my 5.5
in a spot that will not interfere with the bolt rope
2 small holes so i can thread the dyneema bail into the track and back out the track on each side. small stopper knot to secure it
my 6.0 was set up with only 1 small hole drilled in each side. this method leaves the single knot outside the mast and the knot will slide around with the block.
both methods work and has really not (Knot) been a problem[/quote]
This helps a lot. I'll see how far I get with this tomorrow. I figure if the P18 spin was originally rigged to the mast head, the pole was either rigged high or is too short. At a slight upward angle, the pole extends about 4 ft past the bows, which seems plenty long.
Looking forward to a whole new way of hurting myself.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
