[quote=car_guy]I’m not able to find taper pins in size I need so I’ve come up with a solution using a large bolt and some tapered sleeves I can have turned at work. Any thoughts/comments?
[img]https://i.imgur.com/XAcXlyf.jpg[/img]
My major concern is enlarging the holes in the beams. Should I use a tapered reamer with same rape as the pins? This may be hard to find correct size but it would ensure nice contact with pins and beam. Does anyone know if original holes in beams were cut with same taper as pins? Or were the normal holes with slightly smaller diameter as pin was inserted?[/quote]
No HTML tags allowed (except inside [code][/code] tags)
