[quote=Edchris177][quote]Then there is getting the beams out of the hull sockets, I've found lifting the opposite hull generally releases the beams relatively gently.[/quote]
The older Nacra will come apart easy, the hull sockets are not a tight fit, it will just lift out.
The assembly manual says to dip the bolts in the supplied grease cup before installing. If you are operating in fresh water, any marine grease will do.
Be very careful upon assembly, the inserts are not SS, (IIRC) they are brass. Easy to strip. If they are tight removing, run a tap or thread chaser through before assembly.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
