[quote=tominpa]These tires have really soft, flexible sidewalls and will not put up a lot of resistance to coming off the rim. You need to push the bead into the center of the wheel,then slip a pry-bar or tire iron under the bead an pull up. Keep the bead in the center of the wheel on the opposite side of where you are dismounting the tire and be sure to pad the rim with something like milk-bottle plastic to prevent scratching up the finish. You will need to cut off the tubeless valve stem to feed the inflation stem from the tubes When putting the tire back on the rim, just keep the tire bead in the center of the wheel, and you will have lots of slack to just push the tire onto the rim. I think the biggest problem with mounting Cat Trax is getting the tires to set the bead so they take air. That won't be a problem with tubes.<!-- editby --><em>Edited by tominpa on Mar 15, 2021 - 04:50 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
