[quote=Andinista][quote] and having the rode go through a bullet block at one of the bows and then back to the mast step where it's tied off[/quote]
I do something like that: a separate line goes from the mast step, through the center of the bowfoil, and back to the mast step. Both ends end in a carabiner at the mast step, so i can remove either of them: the lower one for the anchor line or the upper one for towing the boat (that part of the line goes in front and above the bowfoil dolphin striker). At the bow foil there is a knot, the line doesn’t run through. The anchor line is tied at the mast step too, but has a second carabiner at the right position to attach the end of the line described. (Hope my English is good enough…) I through the anchor first and then deal with the carabiners. Its a bit more complicated than I’d wish but if I get confused I may also use the line as a guide for the anchor carabiner, and manually push it forward part of the way.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
