• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 07, 2009 - 03:30 PM

  After a great posting by Andrew Scott I realize I now have delamination on the tops of my hulls except around 3 of the posts.
  
  After some reading about the method of epoxy injection I think that may work. I could spend a fortune on Git-Rot and then I realzed I have over a half gallon of slow dry Silver Tip in my garage.
  
  Now my delema is what to use for injection. And will this be enough.
  
  Any Idea's?
  
  Bobby

  • 
  •  
• TurboCat
  
  

  • Rank: Mate
  • Registered: May 30, 2007
  • Last visit: Jun 28, 2011
  • Posts: 101

  Posted: May 08, 2009 - 04:42 PM

  I used the penetrating epoxy from West marine and it worked great on my old hobie. It was 1/3rd the price of Git-rot and was supposed to be an equal product.
  
  I have no idea what silvertip is so im not sure. Just thought i would throw out my solution to the git-rot sticker shock!

  • 
  •  
• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 08, 2009 - 04:53 PM

  Thank you for the reply, I was planning on stopping by West Marine on Monday when Im down in Panama City, Ill check it out.
  
  Sliver Tip is just two part epoxy like MAAS. I used it on 3 different Kayaks I built
  
  Bobby

  • 
  •  
• rhuntbach
  
  

  • Rank: Lubber
  • Registered: Aug 07, 2008
  • Last visit: Mar 14, 2011
  • Posts: 99

  Posted: May 09, 2009 - 01:16 AM

  Quote

  Now my delema is what to use for injection

  
  
  I've done the injection fix on a couple Hobies and I found a meat injector works best. You can get them at Walmart for 2 or 3 bucks, and they do a good job. They're fairly high capacity too, compared to most syringes.

  • 
  •  
• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 09, 2009 - 01:23 AM

  Thanks for the reply Ryan.
  
  Its amazing what you can find at work. 70cc syringes free for the taking. The mechanics use them for "duh" filling in delaminated honeycomb!
  
  I brough home 20, that should do the job!

  • 
  •  
• rhuntbach
  
  

  • Rank: Lubber
  • Registered: Aug 07, 2008
  • Last visit: Mar 14, 2011
  • Posts: 99

  Posted: May 09, 2009 - 11:37 AM

  Nice! That's a good find!

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: May 11, 2009 - 12:07 PM

  
  what kind of mechanics work on honeycomb?
  

  • 
  •  
• popeyez7
  
  

  • Rank: Mate
  • Registered: Apr 26, 2004
  • Last visit: Nov 05, 2024
  • Posts: 399

  Posted: May 11, 2009 - 12:09 PM

  Beehive mechanics??
  
  --
  ~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
  and other toys.......
  ~~ I live in NY state on the north shore of Oneida lake in
  Bernhards Bay. ~~~~~~
  --

  • 
  •  
• popeyez7
  
  

  • Rank: Mate
  • Registered: Apr 26, 2004
  • Last visit: Nov 05, 2024
  • Posts: 399

  Posted: May 11, 2009 - 12:10 PM

  was that supposed to be the $100,000 dollar question?
  
  --
  ~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
  and other toys.......
  ~~ I live in NY state on the north shore of Oneida lake in
  Bernhards Bay. ~~~~~~
  --

  • 
  •  
• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 11, 2009 - 12:48 PM

  Aircraft mechanics.

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: May 11, 2009 - 12:58 PM

  Alex, i will take... "honeycomb" for $500.

  • 
  •  
• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 12, 2009 - 02:48 AM

  Having fun with the injection, finished the first hull today using just over a quart of epoxy.
  
  I started by drilling holes in the center every 6 inches, then after that cured I did a push test down the sides closer to the edge looking for soft spots and filling those up randomly.
  
  Im really pleased how well it stiffened up!
  
  Thank you for everyones input!

  • 
  •  
• gunpilot
  
  

  • Rank: Lubber
  • Registered: May 07, 2009
  • Last visit: May 16, 2009
  • Posts: 9

  Posted: May 12, 2009 - 02:53 AM

  Andrew,
  
  What is most of the skin on an AH-64D made of?
  
  "Beep Beep"
  
  A lot of the aircraft surfaces are honeycomb with kevlar laminated to it. Same as delamination on a hull, when you start getting soft spots, you can inject epoxy.

  • 
  •  
• MN3
  
  

  • Rank: Master Chief
  • Registered: Jun 20, 2006
  • Last visit: May 22, 2024
  • Posts: 7089

  Posted: May 12, 2009 - 08:59 AM

  gunpilot

  Andrew,
  What is most of the skin on an AH-64D made of?
  

  
  
  
  Alex, what is chocolate?

  • 
  •  
•  
•  

Users on-line

• shortyfox

This list is based on users active over the last 60 minutes.