Hobie 16 mast stepping
-
- Rank: Lubber
- Registered: Nov 24, 2008
- Last visit: May 09, 2009
- Posts: 5
We went to dry run riggin up our H16 today and the hinge at the step is broken where the bottom pin goes in, is there anything we can rig to step the mast w/o the pin? Has anyone done this? thanks fro the help -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
They do sell replacement hinges.. but i think you mean your mast or base is broken.
Either way you will need to repair this... with either a new mast base or a new base plate (on the beam)
Even if you can rig a way to step the mast.. this is not good because you will have problems bringing the mast down (safely). -
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Andys right....... ya better hope it the 'mast' base and not the one on the frame....
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089