I have to plug & redrill some Hobie standard rudders.
Does anyone have a technique, material, or thoughts on this process. I may need to redrill close to or in part of the plug.
Thanks, Dave
Plugging & redrilling Hobie rudders
-
- Rank: Lubber
- Registered: Oct 08, 2008
- Last visit: Dec 28, 2010
- Posts: 3
Posted: May 28, 2009 - 11:36 AM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: May 28, 2009 - 12:36 PM
i have had it done... it is doable. i dont know the exact process... but it is possible. -
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: May 28, 2009 - 03:16 PM
Hobie sells a metal template that fits on all Hobie rudders and has the exact place to drill or redrill for Hobie rudders and the holes are very close. H-16 rudders with adjustable upper castings are drilled different than H-16 rudders without adjustable upper castings and so on. Your local Hobie dealer should have one of these. I bought one for myself years ago and was happy that I did and so are my friends. -
- Rank: Mate
- Registered: Mar 02, 2003
- Last visit: Jun 09, 2010
- Posts: 119
Posted: May 30, 2009 - 09:09 PM
Bare in mind that resin will not stick to plastic. On my G-Cat rudder holes I taped one side and carefully located the center of the enlarged hole. Wrapped plastic tape around a dowel of the right size, held it in place, and poured the resin around it. When it hardened the dowel came out easily and the hole was perfect.
