I have a carbon fiber pole that was clear coated.
The clear coat has disappeared. What should I use to re coat the pole.
Carbon fiber paint
-
- Rank: Mate
- Registered: Feb 25, 2007
- Last visit: Jul 13, 2012
- Posts: 414
-
- Rank: Lubber
- Registered: Dec 09, 2008
- Last visit: Apr 06, 2011
- Posts: 99
I've been interested in this too. I did a little digging and found an article online that may offer some help.
http://www.twowheelblogs.com/complete-hack%E2%80%99s-guide-refinishing-non-structural-carbon-fiber
I would have considered using clear gelcoat but this may work better and is much easier.
Good luck! -
- Rank: Mate
- Registered: Feb 25, 2007
- Last visit: Jul 13, 2012
- Posts: 414
http://www.twowheelblogs.…-structural-carbon-fiber
That might work but I was also worried about using the wrong type of clear coat or paint. I don't want to spray on something that will dissolve the resin on the pole.
edited by: skarr1, Jun 11, 2009 - 07:46 PM -
- Rank: Lubber
- Registered: Apr 06, 2005
- Last visit: Jun 12, 2009
- Posts: 2
On my hot stick, i just lightly sanded it, cleaned it with acetone, and brushed on some poly resin. its not too pretty, but i dont get splinters in my hand anymore.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.