Solcat Dolphin Striker Rod & Post
-
- Rank: Lubber
- Registered: Jun 05, 2009
- Last visit: Jul 17, 2009
- Posts: 5
Posted: Jun 10, 2009 - 02:42 PM
Anyone know where I can get one or have one made? -
- Rank: Mate
- Registered: May 07, 2004
- Last visit: Nov 14, 2019
- Posts: 141
Posted: Jun 11, 2009 - 12:21 AM
What part do you need exactly? I may have one.
Jeff O
--
Jeff O
N5.0
solcat 18(sold),
N5.2,
H16
Camarillo CA
-- -
- Rank: Lubber
- Registered: Jun 05, 2009
- Last visit: Jul 17, 2009
- Posts: 5
Posted: Jun 11, 2009 - 10:06 AM
The "v" Rod itself. -
- Rank: Lubber
- Registered: Sep 03, 2006
- Last visit: Jul 22, 2014
- Posts: 31
Posted: Jul 14, 2009 - 02:41 PM
I actually had 3 made when I needed to replace mine. Do you want one for $10 plus whatever to ship it? It's stainless threaded rod of the correct length with a hole tapped in the bottom end for the bolt that holds the aluminum band. I reused the bolt in that picture, and the nuts were cold welded. So you'll either need new nuts, or be able to reuse the ones you have. Make sure you grease those puppies up, and use a frikken giant washer!
http://www.thebeachcats.c…pictures&g2_itemId=47807
(that's Sol Cat tips in technical help, if the link doesn't work)
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.