I am looking for the dimensions for a Prindle escape jib in order to replace a damaged one.
can anyone help with any suggestions or suggestions of an owner?
any help much appreciated.
Prindle Escape Jib Dimensions...
-
- Rank: Lubber
- Registered: Jun 07, 2009
- Last visit: Jun 19, 2009
- Posts: 3
Posted: Jun 17, 2009 - 10:10 PM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Jun 19, 2009 - 01:00 PM
I have a decent set of P16 sails that will work on your boat for $295 plus shipping. Let me know if you want to see photos. -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jun 19, 2009 - 05:44 PM
So what does that do? just make a P18 into a fun safe family day sailor or can you still get some good wind with it.
Might be interesting to have another setup with P16 Rigging just in case you wanted to tame it down for the kids or something.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Lubber
- Registered: Jun 07, 2009
- Last visit: Jun 19, 2009
- Posts: 3
Posted: Jun 19, 2009 - 05:50 PM
ok, let me step back one minute- so i understand. the prindle escape is p-18 hulls with the mast and sailplan for a p-16. I understand that to be the case- with that said, i WOULD be interested if possible to have a set of P-18 sails and P-16 for the kids, as i am going to have the kids on quite a bit... but for the occasional race, wouldnt mind having a bit more power... is this indeed possible, or is the mast totally different?
would like to understand...
-
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jun 19, 2009 - 08:32 PM
The mast of a P18 is 2' 9" taller than the P16, so ideally, you would need a P18 mast with all rigging as well as the P18 sails. Then you would be able to change out your boat as needed, P16 for the kids, or P18 for a little extra boost
edited by: turbohobo, Jun 20, 2009 - 01:40 AM -
- Rank: Lubber
- Registered: Jun 07, 2009
- Last visit: Jun 19, 2009
- Posts: 3
Posted: Jun 19, 2009 - 08:46 PM
well shoot- i know i can get the P-18 sails, but alas a mast could prove to be a challenge...
thanks for the info though, that helps out a lot.
-
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Jun 19, 2009 - 09:15 PM
There was a P18 here in the classified adds, guy out of Gainsville FL had to get rid of his boat and what seemed to be part of another P18, sold now -
- Rank: Lubber
- Registered: Jun 21, 2009
- Last visit: Jun 22, 2009
- Posts: 3
Posted: Jun 21, 2009 - 07:53 PM
Have just come across an P18. Sails and hulls in pretty good shape but mast need replaced.. Any idea for a good source of parts.. -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jun 21, 2009 - 11:31 PM
Try Pete Begle in Big Bear, CA
(909) 800-5237
or pbegle@charter.net
Can't say what he will have but he helped out with parts a couple times.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.